Repetier host settings

Search for Freeweb Page information. Find all the information you need for Freeweb Page online on Alot. The linux version comes as gzipped tar file. Move it to where you want your files and unpack its contents and run the post installation script: tar -xzf repetierHostLinux_1_03. RepetierHost sh configureFirst.

Go to the menu “Config”-”Printer Settings” or klick the button. At the start you have only the default printer. To create a new printer you only need to change the printer name and press “Apply”.

The new printer will start with the same settings as the last selected printer. Below the drop down box you see four tabs with most off the data stored with the printer configuration. These can be changed in the g-code editor, which is described in a different chapter.

Connection In this first tab, you set how to connect with your printer. In “Port” you select the port, where your printer is connected. At the opening of the window, all available ports were scanned and added to the list. If you connect your printer when this menue is already open, klick “Refre. Se hela listan på geeetech.

Prepare all objects you want to print, so your printer can print them. Learn how to arrange them on your print bed. Rotate and scale them to your likes.

You start with importing all STL files using the “Add Object” button. You will see the print area on the left side. You can select multiple object files at once if you want. This must be in one of the following formats: STL, OBJ, 3DS.

The host will always try to position the objects in a non overlapping way onto your bed. Browsing 3D View In this window you see your 3D objects. At the left side, you find some navigation buttons: The first buttons change the behaviour of the left mouse button. All funtions can be used with control keys, so that you don’t have to change all the time.

Control: Holding the control button, you can rotate the view with the left mouse button. Shift: Holding shift button you. If you press the ctrl-key while right clicking the selected object is added. To move the selected objects, hold the alt-key down while left clicking and dragging the objects. When you select Top View from the left toolbar, the movements will follow your mouse movements.

If you don’t, the direction of the move is not the same of the mouse movement. Depending on your configuration, the object may start to pulse or change it’s color, if it is not entirely on the print bed. This should help you identifying printing problems, even before you start slicing. Object groups are used only for multi extruder prints. For multi extruder prints you normally get one stl file for each color.

After you loaded them, each has it’s own group, which normally causes wrong relative positioning. So you need to drag the second stl onto the first stl to merge them into one group. After merging you have to assign each file a separate extruder.

Assigning the same extruder will normally cause problems during slicing. Watch the video here Now it’s time to slice your objects. More on this in the next chapter. Open the slicer tab and continue there. To slice objects loaded into the host , you select the profiles you want to use for your slice and hit “Slice with Slic3r”.

C with low PWM setting and go to max PWM setting 2when reaching target temperature. It even can use other external slicing software to slice, such as CuraEngine, Slic3r and Skeinforge software. This video was made in response to a number of comments requesting a video of the settings I have used to make repetier host run smoothly with the da vinci 1. Do This Simply, Click “Printer Settings ” in the Upper Right-hand Corner to Bring Up the Printer Settings Menu.

COM port works and connecte baud rate etc all checked out but sent commands just sit there. When I bring up the EEPROM settings I see no entries for changing the entruder rate. I ask because when I tried tuning the extruder I was seeing 40mm of filament extruded when I asked for 100mm.