Wanho i3

Instruction on adding i3. Official Supported Software. Duplicator ihas left us with an idea of what our customers have been looking for in a desktop machine: reliable quality, beautiful aesthetics, and an unmatched value. Hitta deals från butiker och läs omdömen på Prisjakt. At this point there are two models often referred to as the Vand the V2.

WANHAO DUPLICTOR IV2. Your vision is our driving force! Pre-assembled steel frame Prusa iyou ever had. Depending on the model you have there are some modifications that could be made to the unit.

It contains several technical information about the printer internals. Plus Mark Leveling. CheckingE Motor Knob. How to level i3plus MarkBed? Wanhao iThumb nut and spring set.

Save $Add to Cart. Leading the way in desktop 3D printing. Slic3r – (Free software, download from slic3r.org.) Slic3r_config_bundle.

Profile for the Duplicator i, includes “Print Settings” profiles for 0. Purchase from simplify3d. The Duplicator iV2. Josef Průša (Prusa). See this mod page for the complete instructions.

Of course, for this price, you can’t expect the world on a plate – there are a couple of minor issues you’ll have to put up with, such as the bed leveling and single extruder. Micro Swiss Ninja Flex Drive Plate. Also, watch your wiring in the control box, there are infrequent reports of electrical fires.

This printer will test your patience and your skills, so be warned. För oss är det viktigt med snabb och effektiv leverans till dig som kund. Ni ser alltid om vi har en vara i lager eller inte.

Det är vårt eget fysiska lager och vi hanterar er order via egen logistik, dvs vi har full kontroll på vad som händer. Detta är den nya versionen av värmetub till Duplicator i3. If nothing happens, download GitHub Desktop and try again. It took me days and many print failures to set everything right.

Utskriftskvalitén är väldigt hög om man jämför med andra skrivare i samma prisklass. D-skrivaren lär kunna printa i en hastighet på 1mm per sekun men för att den ska fungera normalt bör hastigheten ligga någonstans mellan och mm per sekund. Has had little use. A new ( genuine ) print-bed mat has been fitted. A spare unused nozzle included (mm) pOne part-used PLA spool is included.

Buy the best and latest wanhao iplus on banggood. I have tried and get a lot of warping and delamination. I tried putting a large box over the printer which did help with the warping some but I am still getting some layer separation.

I used 2°C for the extruder and 1°C for the bed. Its auto-leveling never worked properly since I bought it a year or two ago. We don't actually have the machines, so they don't get tested by Ultimaker in any way.

I decided to upgrade the firmware to try and solve this problem.