How to make a stylus

Stylus Test und Vergleich. Unser Test- und Vergleichsverfahren ist unabhängig, objektiv und TÜV-zertifiziert. Die besten Produkte im Test. Jetzt Produkte vergleichen! Use your pen stylus in the same way that you would use your finger.

Press the cotton ball down on the screen to activate it. Move the stylus around the screen to navigate around the device. Keep spare cotton balls on hand to refill your stylus in case it falls out with usage or in storage.

If your sponge has an abrasive side for scouring, cut this off to avoid scratching your screen. Then, remove the plastic tip and interior of a ballpoint pen. In this video,I will show you how to make premium looking stylus. For the tip that will not add scratches on the screen, the q-tips will work best.

Just cut the cotton covered head down of your q-tip and then fit it in place of your ballpoint tip to gain a stylus. Make the cotton tip a little wet, so it will just work fine and will remain in shape along with cleaning the marks. Unscrew the pen to remove the ink tube. In order to make this stylus, you need a pen that can be unscrewed.

Remove the spring and ink tube from inside the pen and then reassemble the pen. Keep the small inside parts of the pen away from children, as they can pose a choking risk. But why pay a lot of money when you can make one yourself! Make a stylus using pen,thin copper wire and cotton. I am going to share with you a few of my favorite styles when making your DIY capacitive stylus.

Wrap the foil around the neck of the pen making sure that it’s touching the tip of the cotton swab. Secure the aluminium foil with tape at the bottom where it’s touching the pen. Moisten the cotton swab with a drop of water or if you like your saliva. But a sponge is a bit too flexible to make an effective stylus as it is.

This gives it shape and makes it a lot easier to work with. Watch this video to know the few simple steps make a stylus pen at home. Sometimes, buying a stylus pen would cost a little more and this is the reason why most of us take a step back from it.

Folge Deiner Leidenschaft bei eBay! Hi guys, I’m back with the most requested project – a homemade stylus ! I go through all your comments and I love to see your art work, so keep sending me love. You guys said it was difficult to draw with fingers so here is the solution. After my last video on Insta doodling.

First, remove the ink cartridge from your pen and then cut your cotton bud diagonally, 1mm from the end of the bud. Now you can turn any pen or pencil into a stylus in less than 5mins! Next up, insert the cut cotton bud into the hole where the nib of the pen sits. Now screw the pen back and wrap the tin or aluminium foil all around the pen.

Step 1: Remove the ink refill from the pen and open it from the upper part and the lower part. Step 2: Take the wire and measure it with the body of the pen. You need to take the length of the wire more than the body of the pen. A pen stylus is a great way to improve your accuracy when drawing or writing on your touch screen device. Try making your own stylus at home from basic materials.

If you have a metal pen on han simply remove the ink tube and replace it with a cotton ball. Alternatively, use aluminium and foil to turn any pen into a stylus. Saw and file the bottom of the shell until it is just the right length to click the stylus in and out (Image 1).

File down the tip of the the top shell until the stylus (without the spring) sticks out of the shell approximately a half-centimeter (Image 2).